Proper care and maintenance of full face masks with protective coating

How to maintain the protective properties and service life of UNIX 6100 full face respirator with protection against fogging and scratches?

Catch the checklist:

 - Never wipe the glass dry!

After work, wash the product in warm water and soap, clean the glass from dirt and leave the coated surface slightly damp, let the glass dry naturally. After all, if you wipe it dry, the coating may be damaged.

 - No sun and no drying on batteries!

Masks must be stored in closed space at an air temperature of + 5 to +25 ° C and a relative humidity of no more than 65%. The ingress of moisture and direct exposure to sunlight, as well as the thermal effect of heating devices must be excluded, since these factors will lead to a reduction in service life.

 - Protect glass from aggressive substances!

Chemicals with acids, oils, alkalis, silicon should never come into contact with the anti-fog coating. Otherwise, the coating will deteriorate.

 - Do not disassemble the mask yourself, if this option is not indicated in the user’s manual!

You may violate the design and tightness. And this will entail the leakage of harmful substances into the inner mask space.

 - Warm it up!

After storing masks at an air temperature below 0 ° C, before use, they must be kept for at least 24 hours at an air temperature of 20 ± 5 ° C.